M20 EXD/EXE HEX HEAD BRASS PLUG

Hexagon Head Stopper Plug, Globally Approved, Explosive Atmosphere Cable / Conduit Accessory • Provides means of blanking unused cable entries • Temporary or permanent • General purpose / industrial version available • Equipment interface ‘O’ ring seal available • Nylon Ex e only version available (-20°C to +60°C) •-60°C to 200°C (metallic versions) • Globally marked, IECEx, ATEX, cCSAus & UL (EX e Nylon product not UL orcCSAus certified)

Description	Allen key recess	Metallic			Non-Metallic
		Ex “d”	Ex “e”	Industrial	Ex “e”	Industrial
747 Recessed Non-Tamper Proof Type ‘A’	Y	Y	Y	Y	Y	Y
747 Recessed Tamper Proof Type ‘B’	Y	Y	Y	Y	Y	Y
757 Hexagon Head	N	Y	Y	Y	Y	Y
757 Hexagon Head c/w ‘O’ ring seal	N	Y	Y	Y	Y	Y
767 Dome Head	Y	Y	Y	Y	Y	Y
767 Dome Head c/w ‘O’ ring seal	Y	Y	Y	Y	Y	Y

Design Specification	BS 6121:Part 1:1989, IEC 62444, EN 62444
Enclosure Protection	IK10 to IEC 62262 (20 joules) Brass & Stainless Steel Only
ATEX Certificate	CML 18ATEX1320X
UKEX Certificate	CML 21UKEX1238X
Code of Protection	II 2G Ex db IIC Gb, Ex eb IIC Gb, II 1D Ex ta IIIC Da IM2 Ex db I Mb, Ex eb I Mb (II 2G Ex eb IIC Gb, II 1D Ex ta IIIC Da only on Nylon version)
Compliance Standards	EN 60079-0,1,7, 31
IECEx Certificate	IECEx CML 18.0177X, IECEx SIM 15.0002X
Code of Protection	Ex db I Mb, Ex eb I Mb; Ex db IIC Gb,Ex eb IIC Gb, Ex ta IIIC Da
Compliance Standards	IEC 60079-0,1, 7, 31
cCSAus Certificate	1055233
Code of Protection	Ex e II, Class I, Zone 1, AEx e II; IP66, 67, 68; Enclosure Type 4X; Class II Groups E, F and G; Class III
Compliance Standards	C22.2 No. 0, 0.5, 30,94,CAN/CSA E60079-0, 1, 7, UL50 Edition 11, UL1203 Edition 4, UL 60079-0, 1, 7
UL Certificate	E214221(Metallic versions only)
Code of Protection	Class I, Groups A,B,C,D; Class II Groups E,F,G; Class III
Compliance Standards	UL 1203
EAC Certificate	TC RU C-GB.AA87.B.00487
GOST R Certificate	POCC.GB.HA46.H00140
KCs Certificate	14-GA4BO-0255X
CCOE / PESO (India) Certificate	P444949
CCC Certificate	2020322313001727
INMETRO Approval	TÜV 12.1333X
RETIE Approval	03866
UkrSEPRO	CU 19.0372X
SANS	MS-XPL21804 21.0006X
Marine Approvals	LRS: 01/00173, DNV: TAE00000Y, ABS: 17-LD1619350-PDA, BV: 43180/A1BV
Continuous Operating Temperature	-60°C to +200°C (Metallic), -20°C to +60°C (Nylon)
Ingress Protection Rating **	IP66 or IP68 when fitted with a CMP ‘O’ ring or Entry Thread Seal**
Available Materials	Brass, Electroless Nickel Plated Brass, Aluminium, Stainless Steel, Nylon

Note: * Mechanical & Electrical Classifications applied as per IEC 62444 & EN 62444 ** When CMP installation accessories are used. Refer to Maintaining a Seal for further information. *** IP68 tested to a minimum depth of 30 metres for 12 hours, alternate depths / durations can be provided upon request